Piston Compresssor

(0 reviews)

Get Price

(255) Views

(0) Contacts

Contact Company

FaygoUnion

Jiangsu, China

(551) Views

(0) Contacts

1. 8–20 bar of low pressure
our industrial air compressor's configuration:

The standard mode is air adjustment, but the user may alternatively choose an electric adjustment mode (applicable only to motors under 15 HP).
If the machine is made up of two units, each one has an air tank. It can be easily assembled without needing to be purchased separately, saving money.
With a low oil level switch, the air compressor will shut off, and the Protech machine can function normally when the oil level is too low.
Using an air cooling system with an inter and post cooler that has a low speed and compact structure.
Equipped with a 4 micron air intake filter to provide pure compressed air.

1. Light alloy pistons efficiently lower weight and need less mechanical power.
2. Independent seats and cast iron cylinder heads extend the equipment's lifespan.
3. The equipment has a large capacity, more action, high efficiency, and a long service life since it is outfitted with the "Herbiger" automatic efficient valve, which is the king of air valves.
4. A unique flywheel and V belt drive minimize noise during operation
5. The air intake quality is effectively improved and the inlet temperature is lowered with the help of a detachable external air intake silencing filter and precision 10 micron filtration.
6. Two SKF rolling bearings are used in rotating components, which considerably reduces bearing wear and tear and ensure steady operation.
2. 30-40 bar medium pressure
Parts
One advantage of a light alloy piston is its ability to decrease weight and mechanical power consumption.
Cast iron cylinder heads, and independent seats extend the life of the equipment.
The equipment has a large capacity, more action, high efficiency, and a long service life since it is outfitted with the "Herbiger" automatic efficient valve, which is the king of air valves.
A specially designed flywheel and V belt drive minimize noise during operation.
A detachable silencing filter for the outdoor air intake and precise 10 micron filtration efficiently enhance air intake quality and lower the input temperature.
Two SKF rolling bearings are used by rotating components, which significantly lessens bearing wear and tear and guarantees steady operation.
Depending on the working environment, the piston ring's primary wear part service life is 6000 hours.
valve plate 6,000 hours (according on the conditions of the workplace)
3. High pressure, large flow, oil-free air compressor (air flow above 8.5 m3/min).

Piston compressor characteristics:

Cast iron structure: The crankcase and air cylinder are made entirely of cast iron, which extends the unit's service life.
Air cylinder: This deep wing piece type, independent casting air cylinder can eliminate 360 degrees and generate a lot of compressed air heat. It is beneficial for routine maintenance and repairs to have the bold fastening between the air cylinder and the crank case.
Flywheel: To cool the deep wing piece type air cylinder, the middle chiller, and the aftercooler, the flywheel leaf blade creates a sort of air current known as "the tornado."
Intercooler: The tube with fins, which immediately packs the flywheel gas location.
After cooler: Installed in the flywheel gas blow place, the finned tube, forced-air cooling type, is installed in the same manner as the middle chiller. Compressed air that releases after cooling down in comparison to the surrounding air temperature, which is high—roughly 20°C.
Offcenter unloading gear: This stops the unit overload from starting by releasing the air in the cylinder from the cold.
Adjusting device: Every high-pressured unit has the option of dual controls and constant speed control in addition to automatic engine off and start control.
Self-refrigeration draindown system: This valve, which is installed on the exhaust separator/valve's support, automatically releases condensed water when the compressor engine shuts off or unloads in the constant speed control mode.
Electrical machinery: In compliance with the IEC standard, TEFC, the IP54 electrical machinery, is used.
Actuation: The belt transmission is "V" shaped, and the movement is constant throughout the seal shroud.
Foundation: The foundation of the Chungking Steel Works building has an opening with a groove that allows electrical gear to move, which is useful for attaching the leather belt in a "V" shape.