Brass Series PEX Pipe Fittings

(0 reviews)

Get Price

(310) Views

(0) Contacts

Contact Company

Ningbo GreenLake Irrigation Co.,Ltd

Zhejiang, China

(502) Views

(1) Contacts

Instructions for Pipe Fittings:
1. Use a tube cutter on the tubing to cut to length and assure a clean straight cut.
2. Prepare the end of the tube with a deburring tool to assure a surface free of burrs.
3. Slide the nut and then the ferrule onto the tube. The threaded end of the nut must face out.
4. Insert tubing into the fitting body, making sure the tube is bottomed out on the fitting shoulder.
5. Assemble the nut to the body, hand tight.
6. Tighten the nut to the body using a wrench to the number of turns indicated in the table to the right.
The installation procedure of Brass fittings
The easiest to install is the brass PEX fitting. All you need is a tool that clamps the copper crimp ring down. If that is properly done, within a few minutes, you are done with your installation.

Item PEX Pipe Fittings

Made in China factory

Application of Pipe Fittings:
1. Instrumentation, hydraulic and pneumatic systems.
2. Used for aluminum, copper, and plastic tubing, not recommended for steel tubes.
3. Compression fittings are designed for medium-pressure tubing where excessive vibration or tube movement is not involved.
4. Not recommended for application using gaseous media.

Advantages of Brass fittings
Brass is a tough fitting
When looking for a tough fitting to use, brass is a good example. It has some good strength and can be very reliable for PEX fittings.