AquaEnergy Expo is a global exhibition in the water and energy field which includes a magazine, a Knowledge hub, and a virtual expo.

Menu
Wire&Cable Fire Resistance Testing Machine with Shock and Water
(0 reviews)
Get Price
(174) Views
(0) Contacts


Contact Company

Advanced Instruments Co.,Limited
Jiangsu, China
(516) Views
(0) Contacts

  • This cable fire resistance testing machine is to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750ËšC or fire with shock at a temperature of at least 830 °C.
  •  â€‹IEC 60331 Test for electric cables under fire conditions Circuit integrity
  • IEC 60331 Part 11 Fire alone at a flame temperature of at least 750ËšC
  • ​IEC 60331 Part 21 Cables of rated voltage up to and including 0.6/1kV
  • IEC 60331 Part 12 Fire with shock at a flame temperature of at least 830ËšC
  • ​IEC 60331 Part 31Fire with shock Cables of rated voltage up to and including 0.6/1kV 

Place of Origin CHINA
Model Number CFRTM
Brand Name AI
Certification ISO
Electrical AC 380V 3-phase, 50/60Hz, 30A
Ambient Temperature Operating 10°C to 35°C 3
Gas Air and Propane ​
Testing room 3,000 mm (W) x 3,000 mm (D) x 3,000mm (H)
Test Standard IEC 60331&BS6387
Warranty 1 Year
Power Supply AC 380V 3-phase, 50/60Hz, 30A

  • Heat Source: AGF Ribbon Type Propane Gas Burner
  • ​Structured with 3 rows of cross holes, Average front width of burner: 15mm, Hole diameter: 1.32mm, Distance between the center: 3.2mm.
  • ​A polished hole row in the pilot hole for flame preservation on both faces of the Burner plate.
  • ​Two thermocouples are horizontally installed separated 45mm left and right of the burner center-line to check the temperature.
  • ​Mass flow controllers regulate the gas and airflow, the accuracy is not less than 1.5%.
  • ​The software can show the burner calibration temperature, propane, air flow rate, etc.
  • ​The current is provided by a three-phase star transformer with sufficient capacity to maintain the required test voltage when circuit integrity cannot be maintained.
  • ​Conductor connection indicator (LED indicator) to form a current.
  • ​The voltage value is automatically set by software and adjusted by a panel controller.
  • ​Digital display of the current and voltage data, accuracy of current is 0.001A.
  • ​Current protection uses a fuse with 2A.
  • The real-time measurement data of all current and voltage are collected by computer, and the curves of current and voltage are generated.
  • ​When circuit integrity cannot be maintained, the corresponding indicator lamp is extinguished, the computer automatically determines the state and records the time, and sends out the sound and light alarm.

Product Reviews
You must Login/Register to can submit your review

All Rights Reserved to AquaEnergy Expo © 2024